Klipsch Reference Premiere Floor 5.1 Speaker Systems

The common speaker in each of the three Klipsch Reference Premiere 5.1 home theater bundles below is the pair of versatile wedge-shaped 8.5″ high, 6.8″ wide, 12.6″ deep RP-500SA II surround sound/Dolby Atmos speakers [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] which feature a 1″ tweeter and 5.25″ woofer in a sealed enclosure with a crossover switch on back that changes between Surround and Dolby Atmos modes for optimized performance in either configuration. As the rear surrounds for your 5.1 surround sound system, you can either simply place them on end tables or speaker stands located at each side of your seating area, firing upward towards the ceiling for a more diffuse rear surround effect, OR you can mount them up high on the walls at each side of your seating each for a more direct rear surround effect. 

In the future should you decide to upgrade to a 5.1.2-channel configuration to take advantage of Dolby Atmos and DTS:X, you can also think of any of these three 5.1 bundles as 3.1.2 by moving the RP-500SA II speakers and placing them atop the floor standing front left and right speaker as elevation speakers or mounting them up high on the front wall as height speakers, and then purchase two more Klipsch Reference Premiere speakers to function as your new rear surround effects speakers, such as a pair of the four-driver RP-502S II, two-way RP-600M II or RP-500M II bookshelf speakers, or another pair of RP-500SA II.

Each of these Klipsch 5.1 speaker system bundles can be purchased at Amazon.com from leading authorized Klipsch online dealers Acoustic Sound Design, Sound Distributors, IQ Home Entertainment, ListenUp, or Worldwide Stereo. Each bundle should be delivered in FIVE BOXES, perhaps not all on the same day. Of course, you will need to separately supply or select and purchase a home theater receiver. Speaker wire, subwoofer cable, HDMI cables, et cetera are also sold separately. 

Klipsch RP-8000F II 5.1 Home Theater Speakers Bundle

The floor standing front left and front right speaker is the 43.1″ tall, 10.8″ wide, 18.3″ deep, 61.4 pound top-of-the-line Klipsch Reference Premiere RP-8000F II tower speaker [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which features a Tractrix horn loaded 1″ titanium tweeter, dual 8″ cerametallic woofers, and dual rear-firing ports. The five-driver 26.9″ wide, 5.7″ high, 6.5″ deep RP-404C II center channel speaker [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] features a 1″ tweeter and quad 4″ woofers in a sealed enclosure.

You already know about the pair of RP-500SA II rear surround speakers discussed at the top of this page. Last but certainly not least, the lowest frequency bass effects are provided by the behemoth Ebony finish 21.5″ high, 19.5″ wide, 22.3″ deep, 75.4 pound 400-watt continuous/800-watt peak SPL-150 powered subwoofer [manufacturer’s link] [available at Amazon] which features a front-firing 15″ long throw woofer with a slot port beneath it.

How to Buy This Speaker System You can purchase your Klipsch RP-8000F II 5.1 home theater speaker system with either ALL six Ebony speakers or five Walnut speakers and Ebony subwoofer at Amazon.com. You can also buy this Klipsch speaker system bundled together with the THX certified Onkyo TX-NR6100 7.2-channel home theater receiver.

Klipsch RP-6000F II 5.1 Home Theater Speakers Bundle

The floor standing front left and right speaker is the 39.6″ tall, 9.3″ wide, 17.6″ deep, 49.4 pound RP-6000F II tower speaker [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which features a Tractrix horn loaded 1″ titanium tweeter, dual 6.5″ cerametallic woofers, and dual rear-firing ports. The center channel speaker and rear surround speakers are the same RP-404C II and RP-500SA II as the bundle above. Lastly, low frequency effects are handled by the Ebony finish 17.8″ high, 14.7″ wide, 19.9″ deep, 45 pound 300-watt continuous/600-watt peak SPL-120 powered sub [manufacturer’s link] [available at Amazon] which features a front-firing 12″ long throw woofer and a slot port underneath. 

How to Buy This Speaker System You can purchase your Klipsch RP-6000F II 5.1 surround sound speaker system with either ALL six Ebony speakers or five Walnut speakers and Ebony subwoofer at Amazon.com.

Klipsch RP-5000F II 5.1 Home Theater Speakers Bundle

The floor standing front left and right speaker is the 36.1″ tall, 8.2″ wide, 14.8″ deep, 38.6 pound RP-5000F II tower speaker [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which features a 1″ tweeter, dual 5.25″ woofers, and dual rear-firing ports. The center speaker is the 19.3″ wide, 6.9″ high, 10.6″ deep RP-500C II [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] which features a 1″ tweeter, dual 5.25″ woofers, and a rear port. The rear surround speakers are the same RP-500SA II as the two bundles above. Finally, low frequencies are supplied by the Ebony 16.6″ high, 14″ wide, 17.8″ deep, 37 pound 200-watt continuous/450-watt peak SPL-100 powered subwoofer [manufacturer’s link] [available at Amazon] which features a 10″ front-firing long throw woofer and slot port. 

How to Buy This Speaker System You can purchase your Klipsch RP-5000F II 5.1 home theater speaker system with either ALL six Ebony speakers or five Walnut speakers and Ebony subwoofer at Amazon.com. You can also buy this Klipsch speaker system bundled together with the THX certified Onkyo TX-NR6100 7.2-channel home theater receiver