ELAC Debut 2.0 Series Floor Standing 5.1.2 Speakers
Featuring new custom drivers and improved cabinet design, ELAC’s Debut 2.0 speaker series was developed by legendary loudspeaker designer Andrew Jones who worked with ELAC from 2015 until 2021. The ELAC Debut 2.0 Series of speakers is mostly rated 6 ohms impedance, and has a lower (85-87dB) sensitivity rating compared to many other speakers on the market, which means that you will need to drive them with plenty of power. You’ll need to separately supply or select and purchase a 7.2-channel or more home theater receiver which is capable of decoding Dolby Atmos and DTS:X surround sound. Speaker wire, subwoofer cable, HDMI cables, et cetera sold separately. For unknown reasons, the photos of both ELAC speaker bundles below only picture one of the included two floor standing front speakers.
ELAC F6.2 Floor Standing 5.1.2 Home Theater Speakers
The black ash vinyl finish floor standing front left and right speakers are two 43.2″ tall, 7.7″ wide, 10.6″ deep ELAC Debut 2.0 F6.2 [manufacturer’s link] [available each at Amazon] which feature a 1″ cloth dome tweeter, triple 6.5″ woven aramid fiber cone woofers, and also triple rear ports. The elevation/height speakers which simply sit atop each front speaker are a pair of small upward-firing 4.9″ high, 7.1″ wide, 9.2″ deep A4.2 Dolby Atmos module speakers [manufacturer’s link] [available at Amazon] with 0.5″ tweeter and 4″ woofer in a sealed enclosure.
The center channel speaker is the 23.4″ wide, 7.6″ high, 10.6″ wide C6.2 [manufacturer’s link] [available at Amazon] with 1″ tweeter, dual 6.5″ woofers, and dual front ports. The bookshelf rear surround speakers are a pair of 14.8″ high, 7.7″ wide, 10.6″ deep B6.2 [manufacturer’s link] [available at Amazon] with 1″ tweeter, 6.5″ woofer, and front port. Lastly, the low frequency bass is provided by the 14.3″ high, 13.5″ wide, 13.5″ deep, 62.1 pound SUB3010 200-watt RMS/400-watt peak powered subwoofer [manufacturer’s link] [available at Amazon] with 10″ front-firing driver and 10″ bottom-mounted passive radiator.
How to Buy This Speaker System You can purchase your ELAC F6.2 5.1.2 home theater speaker system at Amazon.com. This ELAC speaker system should be delivered in SIX BOXES, perhaps not all on the same day.
ELAC F5.2 Floor Standing 5.1.2 Home Theater Speakers
The floor standing front left and right speakers of this lower-priced ELAC bundle are two 40″ tall, 7.1″ wide, 9.2″ deep Debut 2.0 F5.2 [manufacturer’s link] [available each at Amazon] which feature a 1″ tweeter, triple 5.25″ woofers, and triple rear ports. Elevation/height speakers are the same A4.2 Dolby Atmos modules as the first bundle above. The center channel speaker is the 21.3″ wide, 7.1″ high, 8.6″ deep C5.2 [manufacturer’s link] [available at Amazon] with 1″ tweeter, dual 5.25″ woofers, and dual front ports. The bookshelf rear surrounds are a pair of 13.4″ high, 7.1″ wide, 9.2″ deep B5.2 [manufacturer’s link] [available at Amazon] with 1″ tweeter, 5.25″ woofer, and a front port. Finally, the deepest bass is handled by the 13.5″ cubed, 28.7 pound S10.2 100-watt RMS/200-watt peak powered sub [manufacturer’s link] [available at Amazon] with a 10″ bottom-firing driver and front port.
How to Buy This Speaker System You can purchase your ELAC F5.2 5.1.2 home theater speaker system at Amazon.com. This ELAC speaker system should be delivered in SIX BOXES, perhaps not all on the same day.