Home Theater Receiver + 5.1 Speaker System Bundles

A six-piece, 5.1-channel surround sound speaker system is the most basic complete home theater speaker system you can set up that provides truly immersive audio similar to what you can experience when seeing a movie at your local cinema. The front soundstage in your home theater room requires individual left, center, and right speakers, ideally from the same brand and series. The left and right channel speakers can be either two floor standing tower speakers or a pair of small bookshelf or smaller satellite speakers which should be located at each side of your television or projector screen. The center channel speaker’s primary job is dialogue so it works best centered underneath your TV or projection screen (or hidden behind an acoustically-transparent screen).

The surround effects speakers are typically a pair of small speakers which should be located near each side of, and preferably slightly behind, your seating area with their tweeters at ear level or higher, either on end tables, atop speaker stands, or mounted on the wall. The .1 in 5.1 stands for the dedicated Low Frequency Effects (LFE) channel in which the deep bass is provided by a powered subwoofer. The sub should be placed where it sounds best in the room, perhaps near a corner.

Each of the 5.1 bundles below include the THX Certified Select Onkyo TX-NR6100 7.2-channel network-ready home theater receiver [manufacturer’s link] [available at Amazon]. Required speaker wire, subwoofer cable, HDMI cables, et cetera which are necessary to complete the proper setup and installation of your home theater audio system are sold separately.

Onkyo TX-NR6100 + Klipsch RP-8000F II 5.1 Speakers

The top-of-the-line Klipsch Reference Premiere front left and right tower speakers are two 43.1″ tall, 10.8″ wide, 18.3″ deep, 61.4 pound RP-8000F II floor standing speakers [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which feature a Tractrix horn loaded 1″ titanium tweeter, dual 8″ cerametallic woofers, and dual chamber rear-firing Tractrix ports. The top-of-the-line five-driver RP-504C II center channel speaker [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] measures 32.1″ wide, 6.9″ high, 15.1″ deep, weighs 36.3 pounds, and features a 1″ tweeter, quad 5.25″ woofers, and is rear-ported.

The side/rear surround effects speakers are a pair of wall-mountable, wide-dispersion, four-driver, 14.2″ high, 11.9″ wide, 7.6″ deep RP-502S II [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] which feature dual 1″ tweeters and dual 5.25″ woofers in a sealed enclosure. Lastly, a plethora of deep satisfying bass is provided by the top-of-the-line 21.5″ high, 19.5″ wide, 22.3″ deep, 75.4 pound, 400-watt continuous/800-watt peak SPL-150 powered subwoofer [manufacturer’s link] [available at Amazon] which features a 15″ front-firing driver and flare port. 

How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver with the Klipsch RP-8000F II 5.1 speaker system bundle with ALL SIX Ebony speakers or with FIVE Walnut speakers and Ebony subwoofer at Amazon.com. The system should be delivered in SIX BOXES, perhaps not all on the same day. 

Onkyo TX-NR6100 + Klipsch RP-6000F II 5.1 Speakers

The “next step down” Klipsch Reference Premiere front left and right tower speakers are two 39.6″ tall, 9.3″ wide, 17.6″ deep, 49.4 pound RP-6000F II floor standing speakers [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which feature a Tractrix horn loaded 1″ titanium tweeter, dual 6.5″ cerametallic woofers, and dual rear-firing ports. The “next step down” five-driver 26.9″ wide, 5.7″ high, 6.5″ deep RP-404C II center channel speaker [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] features a 1″ tweeter and quad 4″ woofers in a sealed enclosure.

The side/rear surrounds are a pair of 15.8″ high, 8″ wide, 13″ deep, 18.1 pound RP-600M II bookshelf speakers [manufacturer’s link] [available in Walnut] or [Ebony at Amazon] which feature a 1″ tweeter, 6.5″ woofer, and are rear-ported. Finally, the lowest frequency bass is supplied by the “next step down” 17.8″ high, 14.7″ wide, 19.9″ deep, 45 pound, 300-watt continuous/600-watt peak SPL-120 powered sub [manufacturer’s link] [available in Ebony at Amazon] with a 12″ front-firing driver and flare port.

How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver with the Klipsch RP-6000F II 5.1 speaker system bundle with ALL SIX Ebony speakers or with FIVE Walnut speakers and Ebony sub at Amazon.com. This system should also be delivered in SIX BOXES, perhaps not all on the same day. 

Onkyo TX-NR6100 + Klipsch RP-600M II Bookshelf 5.1

The front left and right bookshelf speakers are a pair of the same Klipsch Reference Premiere RP-600M II as the side/rear surrounds that are included with the bundle above. The center channel speaker is the same RP-404C II as the bundle above. The side/rear surrounds are a pair of wall-mountable, versatile-placement 12.6″ x 8.5″ x 6.8″ RP-500SA II surround speakers [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] with a 1″ tweeter and 5.25″ woofer in a sealed enclosure. Low frequency effects emanate from the 16.6″ high, 14″ wide, 17.8″ deep, 37 pound 200-watt continuous/450-watt peak SPL-100 powered subwoofer [manufacturer’s link] [available in Ebony at Amazon] which features a 10″ front-firing driver and flare port.

How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver with the Klipsch RP-600M II 5.1 speaker system bundle with ALL SIX Ebony speakers or with FIVE Walnut speakers and Ebony subwoofer at Amazon.com. System should also be delivered in FIVE BOXES, perhaps not all on the same day.