Receiver + 5.1.2 Dolby Atmos Speaker System Bundles
There are three different ways to configure, set up, and install 5.1.2 Dolby Atmos/DTS:X speakers in your room. First, the most immersive but also most room-intrusive and labor-intensive method (not featured below on this page) is to install a pair of flush-mount speakers overhead in the ceiling in addition to a conventional six-piece 5.1 speaker system. Second, the easiest and least-intrusive solution is going with a six-piece 5.1.2 speaker system that includes front speakers which also feature integrated top-mounted upward-firing Dolby Atmos speakers. Third, another easy (and potentially most versatile) choice is going with an eight-piece 5.1.2 speaker system that includes a pair of small separate Dolby Atmos speaker modules which can simply sit atop the front left and right speakers (or alternatively be mounted high on the front wall up above each front speaker). The easier second and third methods reflect the audio signal for the elevation/height channels angled upward off of the ceiling and back down towards the seating area (like this), where the first method sends the signal downward directly from the ceiling speakers (like this).
Each of the 5.1.2 bundles below include the THX Certified Select Onkyo TX-NR6100 7.2-channel network-ready surround sound receiver [manufacturer’s link] [available at Amazon]. Required speaker wire, subwoofer cable, HDMI cables, et cetera which are necessary to complete the proper setup and installation of your home theater audio system are sold separately.
Tower Front Speaker with Integrated Elevation Speaker
The front left and right tower speakers are two 43.1″ tall, 10.8″ wide, 20.8″ deep, 75.7 pound Klipsch Reference Premiere RP-8060FA II Dolby Atmos floor standing speakers [manufacturer’s link] [available in Ebony – each/pair] or [Walnut – each/pair at Amazon] which feature a Tractrix horn loaded 1″ titanium tweeter, dual 8″ cerametallic cone woofers, and dual chamber rear-firing Tractrix ports on the back. Built into the top of each tower speaker is an angled upward-firing 1″ tweeter and 6.5″ woofer for the height channel. The five-driver RP-504C II center channel speaker [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] measures 32.1″ wide, 6.9″ high, 15.1″ deep, weighs 36.3 pounds, and features a 1″ tweeter, quad 5.25″ woofers, and is rear-ported.
How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver together with the Klipsch RP-8060FA II 5.1.2 speaker system bundle with ALL SIX Ebony speakers or with FIVE Walnut speakers and Ebony subwoofer at Amazon.com. System should be delivered in SIX BOXES, perhaps not all on the same day.
Tower Front Speaker + Separate Atmos Height Speaker
The top-of-the-line Klipsch Reference Premiere front left and right tower speakers are two 43.1″ tall, 10.8″ wide, 18.3″ deep, 61.4 pound RP-8000F II floor standing speakers [manufacturer’s link] [available in Ebony – each//pair] or [Walnut – each//pair at Amazon] which feature a Tractrix horn loaded 1″ titanium tweeter, dual 8″ cerametallic woofers, and dual chamber rear-firing Tractrix ports. Instead of built-in Dolby Atmos speakers like the bundle above, you get a pair of versatile wedge-shaped 12.6″ x 8.5″ x 6.8″ RP-500SA II speakers [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] which feature a 1″ tweeter and 5.25″ woofer in a sealed enclosure, and can either sit atop each front tower speaker or be mounted up high on the front wall. The center channel speaker is the same RP-504C II as the bundle above.
The side/rear surround effects speakers are a pair of wall-mountable, wide-dispersion, four-driver, 14.2″ high, 11.9″ wide, 7.6″ deep RP-502S II [manufacturer’s link] [available in Ebony] or [Walnut at Amazon] which feature dual 1″ tweeters and dual 5.25″ woofers in a sealed enclosure. Last but not least, the lowest frequency bass is supplied by the larger and more powerful 21.5″ high, 19.5″ wide, 22.3″ deep, 75.4 pound, 400-watt continuous/800-watt peak SPL-150 powered sub [manufacturer’s link] [available at Amazon] which features a 15″ front-firing driver and flare port.
How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver with the Klipsch RP-8000F II 5.1.2 speaker system bundle with ALL EIGHT Ebony speakers or with SEVEN Walnut speakers and Ebony subwoofer at Amazon.com. System should be delivered in SEVEN BOXES, perhaps not all on the same day.
Shelf Front Speaker + Separate Atmos Height Speaker
The front left and right and side/rear left and right channels are provided by two pairs of 15.8″ high, 8″ wide, 13″ deep, 18.1 pound Klipsch Reference Premiere RP-600M II bookshelf speakers [manufacturer’s link] [available in Walnut] or [Ebony at Amazon] which feature a Tractrix horn loaded 1″ titanium tweeter, a 6.5″ cerametallic woofer, and a rear-firing port. The Dolby Atmos speakers which can either sit atop each front speaker or be mounted up high on the front wall are the same RP-500SA II as the bundle above. The center channel speaker is also the same RP-504C II as the bundle above. Lastly, the deep bass is handled by the 16.6″ high, 14″ wide, 17.8″ deep, 37 pound 200-watt continuous/450-watt peak SPL-100 powered subwoofer [manufacturer’s link] [available in Ebony at Amazon] which features a 10″ front-firing driver and flare port.
How to Buy this Entire System You can purchase your Onkyo TX-NR6100 receiver with the Klipsch RP-600M II 5.1.2 speaker system bundle with ALL EIGHT Ebony speakers or with SEVEN Walnut speakers and Ebony sub at Amazon.com. The system should be delivered in SIX BOXES, perhaps not all on the same day.